Post-Processing Tools

SLS Workflow Bundle Includes:

• PostPro SFX
• Formlabs Fuse 1+ 30W Printer 120V
• Formlabs Fuse Blast

The AMT PostPro SFX is the first bench-top vapor smoothing system specifically engineered for 3D-printed parts. Perfect for small-scale production and R&D environments, this compact unit leverages AMT’s PostPro Pure green chemistry to achieve an injection-molded level of surface finish without compromising the structural integrity of the part.

• PostPro SFX
• 6 x Processing Racks
• 3 x FA5802 Cartridges
• 6 x Air Filters
• Storage Stand
• Preparation Stand
• 2 Year Warranty

The AMT PostPro SFX is the first bench-top vapor smoothing system specifically engineered for 3D-printed parts. Perfect for small-scale production and R&D environments, this compact unit leverages AMT’s PostPro Pure green chemistry to achieve an injection-molded level of surface finish without compromising the structural integrity of the part.

• PostPro SFX
• 3 x Processing Racks
• 1 x FA5802 Cartridges
• 2 x Air Filters
• Storage Stand
• 1 Year Warranty

AMT FA5802 Cartridge is the most environmentally friendly solution available in the post-processing market. It’s formulated with biodegradable, non-halogenated, and non-toxic ingredients.

The AMT PostPro SFX Air Filter is a consumable component designed to capture solvent residues from the exhaust air of the PostPro SFX during chemical vapor smoothing.

Bundle Includes:

• 1 x 1L FA5802 Cartridge
• 2 x Air Filter

The Fuse Sift is a safe and efficient powder recovery system designed for Fuse 1 generation printers. This user-friendly, all-in-one station streamlines part extraction, powder recovery, storage, and mixing—delivering maximum functionality in a single, standalone unit.

LOCTITE 3D Printing Cleaner C is a non-flammable, ambient temperature post-processing solution for cleaning SLA and DLP printed parts.

Key Features:

• Effectively solubilizes 3D printing resins
• Water rinseable
• Does not damage ‘green’ or cured resins when used as recommended

• Designed specifically for removing soluble support materials from 3D printed parts
• Compatible with both solvent-based and water-soluble support materials
• Compatible with all recommended support removal concentrates

The new Form Cure (Gen 2) post-cures parts 3-5x faster, with many parts reaching full cure in as little as 60 seconds.

Key Features:

• Cure parts up to 200 x 125 x 205 mm on a 235 mm turntable, perfect for post-curing larger Form 4 prints
• The chamber heats to 60°C in under 90 seconds for advanced cure cycles.

The Form Wash L Gen 2 automates the print washing process, ensuring uniform, thorough, and mess-free cleaning of components printed on the Form 4L and Form 4BL.

This portable SLS Vacuum is NFPA-652 compliant and safe for use with all Formlabs SLS powders. It can be connected directly to the Fuse Sift integrated hose for clearing powder from a build chamber, removing debris, and cleaning your SLS workstation.

The Fuse Blast Polishing System is a drop-in upgrade to the Fuse Blast that allows users to add a smooth, semi-gloss, scuff-resistant, and dye-ready surface finish to their SLS printed parts. With the Polishing System, users can create parts for consumer-facing, end-use applications with improved feel and appearance.

This single-step add-on to the Fuse Blast both cleans and polishes your parts straight from the Fuse Sift without the need for another Blast.

Formlabs Resin Washing Solution cleans resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace. Formlabs Resin Washing Solution is recommended with the Form Wash (2nd Generation) and Form Wash L.

The Form Wash Gen. 2 automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents. Parts are precisely and thoroughly agitated with an impeller, automatically getting every surface perfectly clean.

Dynamism has been named a Formlabs Platinum Partner, their highest form of partnership, for consistently providing our customer base with Formlabs products and services.

Dynamism has been named a Formlabs Platinum Partner, their highest form of partnership, for consistently providing our customer base with Formlabs products and services.

The Ceramic Wash Solution is a specialized wash liquid for cleaning ceramic 3D printed parts. A wash in this solution is required for parts printed in Alumina 4N Resin. Ceramic Wash Solution is non-hazardous and non-flammable.

This all-in-one manual post-processing kit allows users to easily clean SLS parts, and recover, sift, and mix used powder to prepare for the next print. Easily switch between materials without the hassle of cleaning machinery.

The Fuse 1+ 30W and Fuse Sift bring the industrial power of Selective Laser Sintering (SLS) to your benchtop, providing prototyping and production at a tenth of the cost of existing SLS machines, all with the efficient end-to-end workflow that Formlabs is known for.

• Selective Laser Sintering (SLS) 3D Printer
• 165 × 165 × 300 mm Build Volume
• Available Materials: Nylon 11 CF / Nylon 11 / Nylon 12 GF / Nylon 12 Powder
• SLS technology provides isometric part strength and batch production through part packing, with no supports required
• Improved 30W Laser for faster printing speed and additional material options

• Fuse 1+ 30W Printer with Stand
• Fuse Sift
• Build Chamber
• Powder Cartridge
• Nylon 11 CF, Nylon 11, Nylon 12 GF and/or Nylon 12 Powder
• Cleaning Kit
• Service Plan

The Form Wash L automates the print washing process and provides consistent, thorough, no mess cleaning for parts printed on the Form 3L and Form 3BL.

The Form Cure L precisely combines temperature and 405 nanometer light to post-cure parts for peak performance.

Nexa3D xClean Wash Unit for use with NXE400 printers.