Parts

The PrintDry Filament Dryer Pro3 ensures that filament stays in optimal condition while printing, and is can hold two filament spools for simultaneous drying and printing.

• Digital Display
• Double-wall Structure
• Spool adapters for both large and small spools
• Built-in timer with maximum time of 48 hours
• Maximum temperature setting 85ºC
• Fits two filament spools up to 8" outer diameter.
• Large spool (12" outer diameter) compatible with Large Spool Kit sold separately 

• PrintDry Filament Dryer PRO3
• Two metal shafts
• Four large spool adapters
• Four small spool adapters

The PTFE tube helps guide the filament smoothly and reduce resistance during printing. It has an inner diameter of 2.5mm and an outer diameter of 4mm.

Required to dry filament in more than one AMS 2 Pro at the same time.

When using an AMS 2 Pro with an X1, P1, or A1 series printer and taking advantage of its drying function, each AMS 2 Pro must be powered by its own Switching Adapter.

The Bambu Lab Filament Buffer is an add-on that works with a single AMS unit to help manage the flow of filament. It connects using a 4-pin cable with a 3mm pitch and snap-in terminal on the input side, and a 6-pin cable with a 3mm pitch and open snap-in terminal on the output side.

Bambu Lab Bus Cable - 4 Pin, 260mm for connecting a printer to Hub or Buffer.

• Designed specifically for removing soluble support materials from 3D printed parts
• Compatible with both solvent-based and water-soluble support materials
• Compatible with all recommended support removal concentrates

• Active Air Vent 85°C Filament Drying
• Up to 24-color/Multi-material Printing
• Brushless Servo Feeding Motor

Please note:

• AMS HT compatibility with X1/P1 printers will be added through an OTA update by the end of April
• AMS HT compatibility with A1/A1 mini printers will be added through an OTA update in Q3 2025

The new Form Cure (Gen 2) post-cures parts 3-5x faster, with many parts reaching full cure in as little as 60 seconds.

Key Features:

• Cure parts up to 200 x 125 x 205 mm on a 235 mm turntable, perfect for post-curing larger Form 4 prints
• The chamber heats to 60°C in under 90 seconds for advanced cure cycles.

The upgraded 300℃ high-temperature nozzle features a proximal dual-gear extrusion mechanism and a full titanium alloy heat pipe. It incorporates a chrome zirconium copper nozzle paired with a 60W ceramic heating pad, ensuring smoother and more consistent extrusion for improved printing precision.

Features double gears crafted from stainless steel, offering enhanced extrusion force, reduced slippage, and improved abrasion resistance.

Please note: compatible with P1 series printers only.

The complete hotend assembly includes hotend with .4mm nozzle, cooling fan, ceramic heater, thermistor and silicone sock. Unit is pre-assembled and ready to use.

Please Note: Compatible with P1 series printers only

The complete hotend assembly includes hotend with .4mm nozzle, cooling fan, ceramic heater, thermistor and silicone sock. Unit is pre-assembled and ready to use.

Features double gears crafted from hardened steel, offering enhanced extrusion force, reduced slippage, and improved abrasion resistance.

IDEX stands for Independent Dual Extruder, meaning each extruder can move independently. This allows the active extruder to print while the second one is parked outside the printing area. As a result, dual material printing using IDEX technology yields cleaner results and higher success rates compared to configurations where the two print heads are mounted side by side on the same carriage.

Includes :

• Secondary Printing Subsystem: Griffin printhead, clog detector, PTFE, spool mount.
• Motion System: Secondary Y axis motor with the required components
• Metal brackets for both Y axis and printheads
• Wires, drag chains and optical end-stops.

Print large objects faster with the Modix Griffin High-Flow hotend.

Includes:

• Griffin HF Heat-block
• 80W heater
• PT-1000 Thermistor
• 1mm nozzle

Keep filament organized and within easy reach with the 8kg spool shelf. This sturdy shelf is designed to hold large spools, making it perfect for extended print runs and reducing the need for frequent spool changes.

Form 4L Build Platform Flex with Quick Release Technology allows users to quickly and easily remove parts from the print surface without tools. Recommended for almost all prints, Build Platform Flex eliminates the risk of part damage and streamlines workflow.

This portable SLS Vacuum is NFPA-652 compliant and safe for use with all Formlabs SLS powders. It can be connected directly to the Fuse Sift integrated hose for clearing powder from a build chamber, removing debris, and cleaning your SLS workstation.