UltiMaker Parts & Accessories

The UltiMaker Print Core CC+ 0.40mm delivers outstanding extrusion speeds, achieving flow rates of up to 35 mm³ per second. With an expanded surface area in the melt zone, these print cores enable faster material melting and deposition, delivering high-speed, high-strength prints without sacrificing quality.

Please Note: Only compatible with UltiMaker S8 printers. The CC+ core does not currently support PLA.

The UltiMaker UltiMaker Print Core AA+ 0.40mm delivers outstanding extrusion speeds, achieving flow rates of up to 35 mm³ per second. Its expanded melt zone surface area enhances material melting and deposition, enabling high-speed, high-strength printing while maintaining exceptional quality.

Please Note: Only compatible with UltiMaker S8 printers.

Complete UltiMaker S7 printhead assembly with inductive sensor.

Please note: only compatible with UltiMaker S7

UltiMaker Print Core HT 0.6mm for use with high temperature composite materials.

UltiMaker print cores feature a quick-swap design and EEPROM chip. The print core HT 0.6 is ideal for printing temperature-resistant and durable materials at temperatures up to 340 °C.

Flexible build plate for UltiMaker S7/S8

Please Note: Only compatible with UltiMaker S7 and S8 printers.

Fine Knurl Feeder Kit for UltiMaker.

Please Note: compatible with UltiMaker S3/S5 models only. This version of feeders are installed by default on all UltiMaker S5 printers with a serial number starting with BPP-030368 and higher, or that have had the Fine Knurl Feeder Kit installed. If replacing Course Knurl Feeder, both right and left feeders must be updated at the same time.

Fine Knurl Feeder Left Assembly (Feeder 1) can be ordered here, or Fine Knurl Feeder Right Assembly (Feeder 2) can be ordered here.

Fine Knurl Feeder Right Assembly (Feeder 2) for UltiMaker.

Please Note: compatible with UltiMaker S3/S5 models only. This version of feeders are installed by default on all UltiMaker S5 printers with a serial number starting with BPP-030368 and higher, or that have had the Fine Knurl Feeder Kit installed. If replacing Course Knurl Feeder, both right and left feeders must be updated at the same time.

Fine Knurl Feeder Left Assembly (Feeder 1) can be ordered here, or both Fine Knurl Feeders can be purchased as part of the Fine Knurl Feeder Kit here.

Fine Knurl Feeder Left Assembly (Feeder 1) for UltiMaker.

Please Note: compatible with UltiMaker S3/S5 models only. This version of feeders are installed by default on all UltiMaker S5 printers with a serial number starting with BPP-030368 and higher, or that have had the Fine Knurl Feeder Kit installed. If replacing Course Knurl Feeder, both right and left feeders must be updated at the same time.

Fine Knurl Feeder Right Assembly (Feeder 2) can be ordered here, or both Fine Knurl Feeders can be purchased as part of the Fine Knurl Feeder Kit here.

UltiMaker Nozzle - Brass .8mm, for use with UltiMaker 2+ / Connect series.

Please Note:
Not compatible with UltiMaker 3 / S-series Print Cores.

UltiMaker Nozzle - Brass .6mm, for use with UltiMaker 2+ / Connect series.

Please Note:
Not compatible with UltiMaker 3 / S-series Print Cores.

UltiMaker Nozzle - Brass .4mm, for use with UltiMaker 2+ / Connect series.

Please Note:
Not compatible with UltiMaker 3 / S-series Print Cores.

UltiMaker Nozzle - Brass .25mm, for use with UltiMaker 2+ / Connect series.

Please Note:
Not compatible with UltiMaker 3 / S-series Print Cores.

UltiMaker Print Core CC 0.4mm, for use with abrasive materials.

Please Note: Abrasive material printing compatible with UltiMaker S-line only.

With the print core CC 0.4, you can print composite applications with the same high visual quality as you are used to, providing better printing of small features and thinner line widths to achieve high quality details and a smooth surface finish. Not recommended for filament with high amounts of chopped carbon fiber, as this may result in clogging.

UltiMaker Print Core CC 0.6mm, for use with abrasive materials.

Please Note: Abrasive material printing compatible with UltiMaker S-line only.

The print core CC 0.6 is ideal for printing composite applications that don't require a high level of detail. As this print core can print at thicker line widths, you will be benefit from a shorter print time, allowing you to have the end result faster.

NFC Reel Holder Assembly, compatible with UltiMaker S3.

Officially factory refurbished, includes one year manufacturer's warranty.

Integrated composite-ready filament management solution for the UltiMaker S5 3D printer, providing humidity-controlled storage with automated detection and switching for all UltiMaker filament, and support for additional third-party filaments being added regularly.

• S5 Material Station
• 6 Spool capacity
• Humidity-controlled material
• 24/7 Reliable production

Sliding Block / Belt Assembly Y-axis length 726 for UltiMaker, compatible with UltiMaker S3 models.

Sliding Block / Belt Assembly Y-axis length 714 for UltiMaker, compatible with UltiMaker S5 models.

Sliding Block / Belt Assembly X-axis length 920 for UltiMaker, compatible with UltiMaker S5 models.